UMAREX S&W M&P R8 Compatible 20mm Top Rail

※※This listing is for the 20mm resin top rail (part) shown in the second image only.※※

■Product Information
・This is a 20mm top rail compatible with the UMAREX S&W M&P R8.
※Confirmed installation only on Asian Ver. (resin barrel, receiver, cylinder, etc.)
・Compatible with both Disc Magazine Ver. and Real Cart Ver.
・Sighting with iron sights is possible even with the rail attached.
・The first three screw holes on the top of the barrel are dummy holes without taps, so the 4th screw hole from the front and the rear sight screw hole will be used.
・Since it is fixed using existing screw holes, the main body does not require any modification for installation.
・The three screws included with this product are dummy screws and cannot be used.
※There is a risk of damage if installed with screws of the wrong length. Please check the product images carefully before installation. (See image 3)

※Please Note
・The airsoft body, optical equipment, etc., are for illustration purposes only. This listing is for the 20mm top rail only.
・As it is manufactured using a fused deposition modeling (FDM) 3D printer, there are layer lines.
・Due to individual differences, some items may have burrs or uneven coloring.
・Depending on the individual item, slight adjustments may be necessary.
・There is a risk of deformation if exposed to heat of 70℃ or higher.
・For products that use screws, be careful not to overtighten the screw threads.
・Please read the product information carefully before purchasing.
・Specifications are subject to change without notice for improvements, etc.
・In the unlikely event of an initial defect, we will respond via email and phone.